Duet Fly RRF-36 board case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case and mount for the Fly Can-FD toolboard.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This a a mount and case for the Fly RRF-36 can-fd toolboard for Duet or other RRF based boards.
I printed it in ABS and will solvent weld the mount to the band. And weld the two washers on the rear of the mount to give it enough depth for threaded heat set inserts. The band is to mount it to a Nema 17 stepper.
The cover has gaps around the sides and ventilation holes on the front for airflow.
Ignore the look, I'm sanding it and plan on acetone polishing it after I fill the lettering in the front in with colored epoxy. Waiting until I have other projects that will be filled in ready. Not in a hurry for this since it is part of a Christmas gift printer.
Added a version for the BLtouch. I do not use one but was told on this board you have to use the Dupont connectors to connect it. So it needed addition room inside for the connectors and wiring. Decided to remove the logo to make it easier to print too.