1 / 3
Universal Laptop Stand at 30° - All brands and 13-16" size compatibilty. — zdjęcie 1
1 / 3

Universal Laptop Stand at 30° - All brands and 13-16" size compatibilty.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here is an universal 30° inclined stand that holds any laptop for my small home work desk

Ocena
0 / 5
Polubienia
7
Pobrania
29
Wydruki
0
Wyświetlenia
606
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

Introduction> Conception and main scope> 30° inclination is the most optimal for my small desk at home. Keeping the laptop on a stand allows saving space horizontally and holds the laptop screen closer and more visible to the user.

Dimensions> 340mm x 230mm x 157mm on a desk (excluding laptop and docking station). 

Laptop support plane (inclined by 30°) is 340mm x 260mm 

Design Details> The stand is designed to hold my 14” laptop with its docking station. However, it works with any laptop and/or working station that would fit the dimensions of the plate. The stand has been designed in sub-components smaller than the (170 mm)^3 volume so that all of them are printable with a PRUSA MINI+. The support brackets are designed with a honeycomb core to be stiff and strong but light. Joints between the components are designed to optimize the gluing surface and for lowest stress conditions in the glue line. 

Making Details>

Printer: Prusa MINI+

Material: Prusament PLA

Infill: 15%

Nozzle: 0.4mm

Layer Height: 0.2mm

Support: Yes, where needed. 

Assembly suggestions> Glue the laptop plate first. RHS front to rear and LHS front to rear. Glue together the LHS (2) and the RHS (2) half sides to have the full plate.

Reverse the plate on a plane, glue the three support brackets making sure that they contact the shoulder of the slot in the shearing direction of the load path when the stand is operational. This will minimize the stress in the glue, as the load from the application weight will not put any stress in the glue.

Provided Models> .stl of all the components. .gcode for all the components for how I printed them with my Prusa MINI+.

Design software> Designed in FreeCAD

 

Tagi