Voron V2 Gantry Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A few options to support the flying gantry on Voron V2 during building or maitenance
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 100
- Wydruki
- 2
- Wyświetlenia
- 950
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A few options to support the flying gantry on a Voron V2 - during building or maintenance. Sure a box or beer can works, but options are good.
MGN9 Bracket Mag - My favorite - super quick print and pop in a 6x3mm magnet. Works with any rail hole spacing.
MGN9 Bracket M3x16 - When you really don't want things to move. Remove an existing M3x8 rail screw and swap in the bracket with a M3x16. Made for 20mm center to center spaced rail holes.
140mm 2020 I-Beam - Longer print time, more plastic. Stand this up between the lower frame extrusion and the gantry rail.