1 / 1
F1 Sim Racing Clutch Paddle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of an F1 Steering Wheel Clutch for Sim Racing that can be bolted with two M3 bolts to a clutch arm.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 991
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
*I am currently working on this model. At this stage, I feel the model is a bit uncomfortable in the hand and I need to modify the model to improve comfort. Any advice to improve the design will help* Thanks!
Instructions & Print suggestions
- The holes for the Inserts are 8mm apart, I provided the .step file so you can edit the file if you need a different pattern.
- Use M3x5mm Heat Inserts in the back to be able to bolt the arm down.