1 / 4
Green Lantern Oath - HUEFORGE — zdjęcie 1
1 / 4

Green Lantern Oath - HUEFORGE

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Green Lantern oath hueforge. Not my image. Personal HF license.

Ocena
0 / 5
Polubienia
13
Pobrania
53
Wydruki
0
Wyświetlenia
504
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

0-0.6mm is solid black no details, you can easily add a height range modifier to print 0-0.6mm in 0.2mm layer height to save time but be sure to add the changes at the correct heights because the layer numbers will change if you use a height modifier. 

Filaments Used:
PLA+ CCTREE Black Bean Transmission Distance: 0.3
HS-PLA GEEETECH Blue Transmission Distance: 2
PLA+ Sunlu Silver Transmission Distance: 1.8
PLA AnyCubic Green Transmission Distance: 3
PLA+ HP3DF Starry Night Glow Transmission Distance: 11
PLA+ Sunlu Silver Transmission Distance: 1.8
PLA Creality Value White Transmission Distance: 7.2

Swap Instructions:
Start with Black Bean
At layer #8 (0.76mm) swap to Blue
At layer #12 (1.08mm) swap to Silver
At layer #14 (1.24mm) swap to Green
At layer #17 (1.48mm) swap to Starry Night Glow
At layer #22 (1.88mm) swap to Silver
At layer #23 (1.96mm) swap to White for the rest.
 

The STEP file is NOT a step file. If you own HF feel free to customize or make any changes for your filament or even make it better. Rename .STEP to .HFP and you'll have my hueforge project on it. 

Note: The starry night filament is kind of obscure so as an alternative I'd recommend sunlu PLA+ yellow (the highlighter yellow color) it should look the same. The aura around the hand won't glow obviously but their yellow pla+ still looks super cool under UV like the starry night.

Tagi