AEG AE3450 Vacuum cleaner handle mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The part where the handle/hose is resting whilst having the vaccum cleaner standing upright.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The part where the handle is resting on the backside of the base whilst having the vaccum cleaner standing upright.
UPDATE: I added V2 that prints without support and is a little beefier (green in the pictures). That one I printed in PETG with 5 perimeters (infill at that point probably of no importance) and 3 bottom and top layers. A brim is very much recommended.
For V1 supports will be necessary. I printed in matte PLA 0,15 mm (pink in pictures) with 100% infill and standing upright with the screw hole up. I printed a prototype in the horizontal orientation but the weight of the vacuum handle lead to layer delamination.
The model prints as is provided with the screw hole down and the pin up. The two archs as well as the screw hole printed well without support but even if they turn out rather bad, it probably won't matter since it will likely not affect durability and/or function.
enjoy!