Toner refill funnel for Xerox WorkCentre cartridges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Funnel hops right on top of the cartridge for easier refilling.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
As refilling my toner is way cheaper than buying new cartridges, I came up with this little helper. It is just a quick model, and it may be possible to improve, but it's better to refill with it than without it.
Printed in PETG with 0.4 nozzle, but doesn't really matter for that part the PETG was already loaded. Didn't bother with supports, inner overhangs might come out nicer that in without. Outer overhangs printed quite well. Sure the model can be improved, but I'm not that good with modeling and tinkercad is not the dedicated app that allows fancy shit ;-)
As I just have a WorkCentre 6515 I can just say it fits on the cartridges of this machine. For other models, feel free to test and let us know in the comments, or remix this model.