9x12cm Standard sheet film holder V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
9x12cm variation of 4x5" Standard sheet film holder V2
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 1149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- BSD License
Overview
This is the 9x12cm version of 4x5" Standard film holder. It uses 0.5mm dark slide made from black plastic A4 folder. This will be my main film holders because of metric x-ray film dimensions.
- No supports
- Velvet sealed dark slide hole
- Print it, glue it and use
Printing and cutting
Use something matte: black ASA, HIPS, matte PLA. Print all the parts as is. Make sure that you tuned your flowrate and PA to achieve the flat top surfaces. Use the fine tuned ironing if you can.
Cut the darkslide with the provided .svg from the 0.5mm A4 folder. Cut the 118.5x12mm paper rectangle. The best to use the small laser cutter/engraver for that.
Take the botom, middle and top parts and glue it together precisely.
Take the cap2 and put it into the holder. Put the darkslide on it's place, then put the cap1 onto cap2. That's the exact position where the cap parts must be glued together. Glue the paper rectangle. Done.
Updates
23.10.2023 Added the recess in the bottom part that allows to pick up the film more easily.
15.11.2024 Version 2:
- Added darkslide lasercut template
- Optimized thinner 0.5mm darkslide slot
- Longer film holder, easy handling
- Added 118.5x12mm marking slot