Squished Cat Doorstopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable doorstopper
- Ocena
- 5 / 5
- Polubienia
- 158
- Pobrania
- 616
- Wydruki
- 3
- Wyświetlenia
- 3230
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Now you can hold your door open with style! I promise, no animal was hurt during all tests!
The “Squished Cat Doorstopper” comes in 3 wedge variations. The paws are seperated for easy multicolor printing. Just glue the paws and doorstopper together after printing.
This download is for personal and non-commercial use only. Dont sell my designs or printed designs without permission.
If you want to sell your 3D-printed Neopyx3D designs you need a Neopyx3D - Vendor membership via Patreon.
Feedback is always welcome. Please leave a like, share your make on Printables, Instagram and TikTok and tag Neopyx3D.
Thank you for download and happy printing!
_____________________________________________________________________
3D Printing Settings
Recommended Main Settings doorstopper:
Layer height: 0.2
Infill: 10 - 15 % (original size)
Speed: 40 - 60 mm/s
Print Acceleration: 2750 mm/s2
Print Jerk: 9 mm/s
Supports: No Supports needed
Build Plate Adhesion Type: Skirt or Brim
Printing Temperature and Cooling: depends on filament
Recommended Main Settings paws:
Layer height: 0.2
Infill 100% (original size)
Speed: 40 - 60 mm/s
Print Acceleration: 2750 mm/s2
Print Jerk: 9 mm/s
Supports: No Supports needed
Build Plate Adhesion Type: Skirt or Brim
Printing Temperature and Cooling: depends on filament