Drink Dispencer large remix Gorenje
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed original for easier print and assembly.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 369
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed with magic PLA 3DJake with 3 walls and 3 top &bottom layers with 5% lightning infill with layer height 0.3mm. Recommend printing with a bit higher temperature on hot end for better layer adhesion. I used some old magic 3dJake pla with which i had issues printing but here it turned out satisfactory - not perfect. I really do not care if it holds my beer :)
With tuned printer it is more of a push togehter assembly that does not require gluing. But i suggest gluing - it does not hold together without glue when droping cans in it.
Original that was too big i use in my pantry, also for beer cans :)