Scrabble Tiles Aligner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3 cell x 5 cell grid for aligning and maintaining alignment of standard size Scrabble tiles.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 686
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print nine of these being careful to have the non-chamfered side on the bed. The pocket size is .800 inch (20,3 mm) tall by .730 inch (18,5 mm) wide, which allows a nice snap-fit of the tiles into the printed part for at least 90% of the tiles in a set.
Please note: The fit-up of the printed part to the respective portion of the game board is not perfect for the simple fact that the game maker always has made the board with the target area for the tile on the board smaller than the tile itself. The border between the tiles is the same for both the board and for the printed part - .060 inch (1,5 mm). In playing the game we believe the mismatch is not a big distraction and is outweighed by the tiles remaining 'square" to the board. Enjoy!
Added rev -02 files having .007 inch taller pockets to accommodate the “oddd ball” tiles. Use these files instead of the -01.