P3Steel - Y-axis idler Ø5mm bearings & 20 theeth GT2 Pulley
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
P3Steel - Y-axis idler
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was in need to replace my weared off 3D-printed idler pulleys, the ones i got for replacement have Ø5mm bearings and are a bit wide for Toolson's idler so I've remixed it.
First of all, I've widened the pulley receptacle to accomodate ≈10mm wide pulleys.
I've made recesses (2mm deep) for the nut and screw allowing the use of a M5 x 20mm screw.
Also, I've aded a connection from the base to the support structures in the back to improve their adhession to the bed.
If you think it deserves downloading... Please leave a Like!
Be proud, Show your makes!
Category: 3D Printer Parts
