Original Prusa Enclosure - Slider Lock Latch - Optimised for printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Optimised version of the Slider Lock Latch by @MichaelQ.
- Ocena
- 4,615 / 5
- Polubienia
- 36
- Pobrania
- 176
- Wydruki
- 12
- Wyświetlenia
- 830
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Optimised version of the Slider Lock Latch by @MichaelQ - at least for me. The original version did not print well for me, probably cause I am using a slightly bigger nozzle, probably cause of other reasons. Anyways I also wanted to get the slider down to only be one part, as this was the most annoying piece when things don't match perfectly.
So here it is. My version should be much more forgiving. You can print everything just laying flat on the surface. There is only one remaining overhang, that is not crucial for accuracy in any way. Should also print well on 0.5 and 0.6 nozzles. Like with before you then just push everything together. Unlike before you do not need a M3 square nut for assembly, you can just screw into the plastic - it will just hold nicely. Also the cover will be hold in place by the screw, which I think is quite nice.
Big shoutout to @MichaelQ for the original model. I hope I have actually improved things and you will find this useful. You may use the provided STEP files to further customise this. 😉
Assembly instructions (also see photos)
- Put slider into case.
- Attach cover onto case, this should just snap together nicely.
- Mount to Original Prusa Enclosure (probably using the existing screws).