1 / 3
Original Prusa Enclosure Bottom Hole Fill Print and Plug — zdjęcie 1
1 / 3

Original Prusa Enclosure Bottom Hole Fill Print and Plug

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small easy to print plug which fill the two holes at the bottom to keep the heat inside

Ocena
4,857 / 5
Polubienia
28
Pobrania
163
Wydruki
7
Wyświetlenia
479
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A small easy to print plug which fill the two holes at the bottom to keep the heat inside 

Print instructions:

  • 0.2mm layer height 
  • 100% Infill 
  • PETG

 

Just Print the Set it will take roughly 17 minutes

Then just pop it of and just slide it in the hole at the bottom. You will feel, hear and see when its in the right postion.

Tagi