Everything Presence Lite - Official Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The official case for the Everything Presence Lite Presence Sensor, for smart home automations.
- Ocena
- 5 / 5
- Polubienia
- 106
- Pobrania
- 1066
- Wydruki
- 3
- Wyświetlenia
- 7300
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The Official Case for the Everything Presence Lite - available to print for yourself!
Featuring a stand that allows for mounting in all directions, holes for wall mounting, cable passthrough holes and a completely tool-less design allowing it to be assembled in seconds!
Designed to be used with Everything Presence Lite with the LD2450 sensor, or the DFRobot SEN0395, HiLink LD2410C, HiLink LD1115H, and various Seeed mmWave Sensors.
All parts print without supports, though depending on your printer settings you might need a small brim on the front cover to stop it falling over during the print. I didn't need the brim but YMMV.