1 / 1
Holder Brackets for Dremel Extension 225 in Dremel Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder Brackets for Dremel Extension 225 in Dremel Case
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 748
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (44)Powiązane
Kann man mit Nieten befestigen, es genügt aber auch Superkleber.
Auf den Scharnierseiten am besten nur auf der Oberseite da sich das Scharnier je nach Position vieleicht dahinter klemmt.
_______________________________________________________
You can attach it with rivets, but super glue will also suffice. On the hinge sides, it is best only on the top side as the hinge may get stuck behind it depending on its position.