Kitchen wall TABLETS DISPENSER - LARGE [regular screw]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dispenser for washing machine tablets.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed to hold up to 25 tablets for a washing machine. Size of each tablet up to 30x40, height 20 mm.
Inside slide and side cutouts makes it easy to pull one out while the rest slides down without jamming.
Pieces: Bottom half + upper half to make the dispenser bigger with necessary holder and little cutouts for my kitchen's aluminimum bar.
Assembly: slide both parts in together. The cut is modeled with a stop on the left side so it doesn't slide through. For durability you can glue parts together.
Size: 125x165x105mm (holder plate dimensions 210x100mm). Suitable for any phone or tablet's size
Position: Printed both parts on the side for the correct print of the modeled hook.
Supports: Yes (organic). Can easily be removed. If Snug or other supports are used leaving residue inside, tablettes might not fit anymore.
Nozzle: 0.4
Layer Height: 0.30
Infill: 10%.