Joroto Weight Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My neighbor asked for a weight holder for her Joroto stationary bicycle that had a strap to hold the weights in place…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
My neighbor asked for a weight holder for her Joroto stationary bicycle that had a strap to hold the weights in place should a toddler attempt to knock them free. When I was asked to make more for her friends, I thought I'd post the design and share with the community. The bungie cord is optional, but if it makes momma happy...
I also created a back plate to clamp with. It has a captive nut indent to make installation much easier.
I printed with supports, but I'm not sure they are necessary. All depends on your printer.
Print Settings
Printer Brand:
Printer:
Rafts:No
Supports:
Yes
200
Infill:
20
Filament:
[
Inland PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Inland+PLA&tag=thingiverse09-20) Black/Red
Notes:
I suspect that printing in PETG would be better, but PLA has been working quite well for some time.
After printing, I cut a bungie cord to length and made nots in the ends to strap the weights in place to protect the kiddos.
Category: Organization