1 / 3
takagi water hose reel drip bucket — zdjęcie 1
1 / 3

takagi water hose reel drip bucket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

simple bucket that prevent wet surprises when storing/moving the takagi hose reel

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
149
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have a Takagi water hose reel. (see last picture, 15m variant). When storing the unit after use some water will exit the intake hose and out of the nozzle. I didn't like that, so I took actions. I used this gardena compatible end cab: https://www.printables.com/model/460932-gardena-plug-with-sealing-ring-gardena-stopfen-mit   for the intake and the nozzle got a bucket (this model here). 

You could glue it with double sided tape to the reel, but I prefer to let it loose so I can clean/empty it when needed.

With this two items added, you can transport/store the hose reel in your flat without water drips :-)

 

print instructions

  • use vase/spiral mode
  • line width 0.7mm

 

see also my other Takagi accessories:

 

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.

Tagi