Catan Card Tray - Revised
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New design to accomodate card sleeves.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 1249
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an updated version of my previous version card holder. After prolonged use, the cards were starting to show wear, so we bought the card sleeves https://www.amazon.ca/dp/B07NZMR346?ref=ppx_yo2ov_dt_b_product_details&th=1 for them. The holder is wider and taller with a steeper angle to accommodate the sleeves. Since the cards will no longer fit in the card box, I have a press plate to keep the cards flat and clips to hold the cards for storage.
All parts were printed with PLA, 0.2 layer height, 15% Grid Infill, 3 perimeters, 0.4 nozzle. No supports required.