Filament guide for MMU2 or higher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top loading filament guide
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 476
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This clamp is used to secure the PTFE tube when the spools are above the printer, for example on a shelf (mine is 35.2 mm thick).
The model is made up of 2 separate parts because they must be printed with different orientations (the clamp must be placed horizontally on the surface for greater resistance, while the guide must be printed vertically, in order to obtain a good thread) .
The parts are deliberately hard to assemble (so as to avoid the use of glue), use a file to facilitate the marriage between the clamp and the filament guide
The model is designed to be used with:
https://www.printables.com/it/model/529258-pc4-m10-fitting-printed-substitute