Pinecil Case - Short Tip Inserts w/ CNC Kitchen Insert Tip Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pinecil Short Tip Case inserts, now with insert tip storage!
- Ocena
- 4 / 5
- Polubienia
- 58
- Pobrania
- 156
- Wydruki
- 1
- Wyświetlenia
- 2752
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of a remix of a remix. I adore Stefan's TS101/Pinecil heat-set insert tip, so I adapted the much-loved Pinecil case to hold its ends!
Assembly should be pretty straightforward, install QTY 6 M3 heat-set inserts into Lid_1 and QTY 6 M5x12 countersunk bolts into Lid_2. Assemble the two pieces together with QTY 6 M3x8 countersunk bolts and you should be all set!
Worth noting, this variant makes some sacrifices. Outside of the installed tip in the Pinecil, the lid can only hold two additional tips now instead of four. As well, the brass ends sit taller than the case itself, so I had to modify the base section to leave space for them when the case is closed. The cable wouldn't fit into the remaining section so I've populated it with a redundant iron stand. Feel free to tweak the design if you want to use that space for something else!
Check out Stefan's tool here: https://cnckitchen.store/products/ts100-101-adapter-tips-set-m2-x-m3-m4-m5-m6-1-4-m8-100-lead-and-cadmium-free