Todoroki Belt Canister Prop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of Todoroki's Belt Canisters from My Hero Academia
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need something called a clevis pin to be inserted in the top. This is better than just 3d printing the keyring attachment because it is much less likely to break than a flimsy 3d print. The dimensions are 5mm in diameter and 30mm long. I also used small split rings to attach this to the costume which are around 0.5 inches in diameter. I will link to the materials I used below.
https://amzn.to/3Vf3xxM - Clevis Pins on Amazon
https://s.click.aliexpress.com/e/_DndCK7J - Clevis Pins on Aliexpress
https://amzn.to/4clYulo - Split Rings on Amazon
https://s.click.aliexpress.com/e/_DkKOmp3 - Split Rings on Aliexpress
make sure to select the proper options from these links just in case they change or do not direct you properly.
You will insert the into the top piece and then glue the whole assembly together with super glue or epoxy.
This is best printed in silk silver PLA to get the closest to the finish of the final item without any work. I used SUNLU Silk Gray, but Silk Silver would work just as well.
https://amzn.to/3TDO352 - SUNLU Silk Filament
Disclaimer
As an affiliate of Amazon and Aliexpress, I may earn commissions from qualifying purchases using my links. This does not change the price of any items you buy but does help support me and allow me to continue to make free models for the community. If you would like to support me without paying me directly, please consider using one of my links to make your purchases. Thank you!