Strawberry Support / Podložka pod jahody
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The support prevents the strawberries from getting dirty or moldy.
- Ocena
- 4,952 / 5
- Polubienia
- 246
- Pobrania
- 1088
- Wydruki
- 24
- Wyświetlenia
- 4288
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Anyone who enjoys fresh strawberries without dirt or stones will appreciate this perforated strawberry support. Thanks to the support, the fruit ripens dry and there is no risk of mould.
The diameter of the support is 21 cm, but of course it can be easily enlarged or reduced directly in slicer.
I recommend printing the model in PETG or similarly tough and relatively flexible materials (not suitable for PLA).
Assembly instructions
After printing the model, carefully bend the legs downwards in the middle, then push the ends of the support together and secure by snapping them together. The planar shape will become a conical shape.
Printing instructions
- layer height: 0.2mm
- perimeters: 10
- number of contour loops / skirt: 0
- without supports