1 / 3
Allen key handle with support (fast and small)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allen key handles with optional support. A fast, simple and strong print for small footprint and ergonomic use.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Allen key handle with optional support.
I wanted a fast, simple and strong print.
My choice of printing parameters were: 4 walls, 60% infill, 4 bottom layers, 3 top layers, 0.2mm layer height.
But, from my tests, for smaller allen keys (e.g. 1.2mm), it worked fine also with 2 walls, 15% infill. The print is so small and fast, it doesn't matter. I even did it with 100% infill for the 3mm one.
Features:
- 2 small parts per handle.
- This design uses no threads, no hard to print parts, no support needed.
- The shape gives perfect grip for power.
- Contains a set of 5 handles with size from 1.2mm to 3mm.
- Support for these 5 handles that can be used horizontally or vertically ( with double tape )
- support has a small tray included, to not loose small screws.
- all 5 handles with 4 walls and 60% infill takes 1h:6min (total time) on Bambu printer.
- optional support for the handles takes 27min (total time).
- 44gr. of filament for 5 handles and support.