Wall-Mount Flasghlight Holder - Surefire G2X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall-mounted, using screws, flashlight holder. Specifically sized for a Surefire G2X. UPDATED 10/26/23
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad
I wanted to have a holder or bracket for storing Surefire G2X flashlights and keeping them handy. The mount uses two screw holes, sized at 5mm. These screw holes can be used with #10 or #8 wood or drywall screws. 10s fit a little more snug, but 8s with countersunk heads will center up just fine.
Sample piece printed with Polymaker PolyLite PLA Pro in Black. No supports used, print screw holes down as in second picture.
Should also work with Streamlight PolyTac without the clip, but I'll have to get one to test.
UPDATE - 10/26/2023 - I have uploaded a second version with some radiused edges and corners. Original has sharp points on it. Look for the “_v2” file for the radiused version. This version is also oriented properly for printing.