Dyson V10 / V11 cross-bolt trigger lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trigger lock for the V11 series that doesn't hinder normal operation of the trigger. Made from a scan of the V11.
- Ocena
- 4,556 / 5
- Polubienia
- 100
- Pobrania
- 516
- Wydruki
- 8
- Wyświetlenia
- 4332
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I - like many people - was annoyed by the lack of a trigger lock on the V11 series. I tried many solutions to this; some community and others commercial but all of them came up short. They either were a piece that I would lose, or they restricted the operation of the trigger when attached. There had to be a better way…..
So, sat on my sofa one evening I was thinking about the V11 (as you do) and triggers when a thought entered my head: “What else has a trigger? Firearms have triggers. Some firearms have cross-bolt safeties or cross-trigger safeties that lock the trigger out. What if a cross-trigger safety could work in reverse?”
So, I took a scan of the V11 and got CAD'ing. This was the result: A cross-trigger safety that doesn't restrict the operation of the trigger.
To complete you will need:
- 2 x M3x10mm Allen head bolt
- 1 x M2x40mm Allen head bolt
- 1 x M2 nut
Tolerances should be OK as is. I printed the parts in PLA on a Bambu X1C but any accurate printer (Prusa etc.) will be fine.