Anti-vibration, Squash ball feet for stone / concrete slab
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For using squash balls under stone / concrete slabs instead of foam.
- Ocena
- 4,95 / 5
- Polubienia
- 156
- Pobrania
- 410
- Wydruki
- 22
- Wyświetlenia
- 5762
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
The dovetails could use some optimization, but it works. They disable the need for supports when printing.
I use 6 balls under my granite slab just to give some extra support in the back since I have my spool on the printer (and I had 2 balls spare). But one ball in each corner is fully sufficient!
Use double-sided tape to fix the feet to the slab.
I use double yellow dots on the squash balls and they do a great job of not transferring the vibrations to the surface below. The setup is surprisingly sturdy as well.
Printed with Prusament PETG, 20% infill, 0.2mm layer height, with PrusaSlicers standard profile.
(Don't forget to flip “corner piece.stl” in the slicer berofe printing).