Pentacle Fridge Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A chilling pentacle for your chiller.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Standard Digital File License
A pentacle fridge magnet, supporting 5x2mm disc magnets.
Printing
This is made to be printed with its front side directly on the print bed with no supports with a 0.2mm layer height. I use an 0.4mm nozzle.
The Bambu 3MF in the files area was used to produce the model in the above pictures with Extrudr NX-2 matte black and epic purple.
Magnets
For safety purposes I put a small amount of glue on a magnet before insertion. As the gap is tight to accommodate optionally using no glue, the easiest way to do this is to put the magnet on the back of a metal spoon, dab the glue, carefully align the magnets over the holes and apply pressure. It should pop right in.
Support
If you like our work please consider joining our club here on Printables!