1 / 5
BaBo organizer insert side cutter 5x3 (2 versions)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This BaBo insert was designed to hold a side cutter firmly in place and available at all times.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 489
- Wydruki
- 16
- Wyświetlenia
- 1121
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 16) (Komentarze: 20)Remiksy (0)Kolekcje (98)Powiązane
This insert was designed for a side cutter as an addition to the amazing BaBo organizer system from @Willi. Check out his site for more great inserts and modules.
You can choose between two versions:
- version 1: insert with border
- version 2: insert without border, instead closed top layer
Size:
- box: 150 x 90 mm (i.e. 5x3)
- side cutter: please check attached pdf
The attached PDF shows the top view of the box at a scale of 1:1. To make sure whether your side cutter fits into the insert before printing, you can simply print out the PDF and position your side cutter on the drawing. Please make sure you select "actual size" for printing. You can check the scale using the outer dimensions of the box. The lines on the inside of the shown side cutter are decisive for the test.
known matching side cutters:- Knipex 78 03 125 (see make from Stony)
- Knipex 78 13 125 (see make from Uetzguer)
- Knipex 78 31 125 (see make from A3D)
- Knipex 78 61 125 (see make from Helvedo)
- Knipex 78 81 125 (see make from Willi)
- Plato Model 170 (see make from Petros Foulidis)
- Bleds 8109 (see make from jgelwix)
Printing:
Layer height: 0.2
Supports: No
Brim: No
Material: all
Nozzle: 0.4 mm
The uploaded example is printed with PLA filament in black matt and grey
(shown is a combined insert with my plier)