Brewzilla 35/65L Gen 3 Wort Tap Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple cap to seal the wort tap during storage for the Kegland Brewzilla 35 & 65L Gen 3 brewing devices.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
What is this?
This is a basic cap I designed to seal the 13mm opening in the wort tap of the Brewzilla 35/65L Gen III all in one brewing device between brews, when it is in storage in my garage. The garage is dusty and there are insects around, so it's necessary to seal it so it is ready to go straight away for the next brew. It fits very nicely, and has a ridge around the perimeter to aid in removal. It also fits standard beer tap spouts, bonus!
It is essential to print this in a flexible filament, such as TPU, so that it can be stretched over the outlet, and doesn't slide off. My example is printed in Overture Green TPU (Shore Hardness 95A), 0.2mm layers/0.4mm nozzle, 228/40C, 20% IF, 3 walls, 4 layers top/bottom, 120% flow, 20mm/s, no parts cooling fan, gluestick used, and a magnetic textured PEI sheet. Printed on a E3V2 with Mellow all metal hot end and hardened steel nozzle, capricorn tube, and Minimus fan shroud.