3D Printer Flush Scraper (no scratching)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A scraper that prevents the tip of the blade from touching the bed to avoid scratching it.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 354
- Wydruki
- 4
- Wyświetlenia
- 1690
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I hate using normal scrapers because they scratch the 3D printer bed, and plastic scrapers are not strong enough, so I made this scraper so the tip of the blade never touches the bed, but it gets very close to be effective removing the plastic attached.
You need:
I also made an optional holder that uses 7x5mm magnets.
My original design had a fixed height/angle but I discovered that it's better to be able to change the angle to accommodate differences on blades and even wear so I have available both version.
The assembly is really easy with washers at the ends and the lock nut keeping the screws with a slight pressure. The hard part is adjusting the height of the blade to keep it at a perfect angle and level.
The design is very compact so it can be manipulated inside small spaces like inside the printer.