1 / 1
A trellis joint for climbing plants from NORTENE rods — zdjęcie 1

A trellis joint for climbing plants from NORTENE rods

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I need to bind NORTENE rods to solid trellis

Ocena
0 / 5
Polubienia
25
Pobrania
53
Wydruki
0
Wyświetlenia
491
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I need to bind NORTENE rods to trellis.

https://www.bauhaus.cz/nortene-opora-pro-rostliny-23865552

Printing of basic version needs custom supports. Vertical clip has very good elasticity. The problem here is that horizontal support does not have sufficient elasticity. It could be improved with increasing extruder temperature +10°C. This problem is not observable on 8mm diameter, only for 16mm rod diameter.

Version A does not need supports but it needs to be be heated and formed to a circle after printing.

I has been added one M4 bolt to fix on a vertical rod. It seems that bolt is not neccessary in most cases and a grip is sufficient enough.

 

Alternative product:

https://www.bonatrade.cz/spojka-krizova-na-zahradni-tyce-16mm-10ks/

No longer available: https://allegro.cz/nabidka/360-otocna-spojka-pro-zahradni-tyce-6-kusu-15601948349

This joint has rotation capability, but my published joint has possibility to use screw and tighten to vertical rod much more reliable.

PS 2026: Added OhradkaNaOstruziny_8b that is more robust and provides better attachment for upper layer of trellis.

Tagi