Flip Stop for 4040 Extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a flip stop or fence stop for a DIY fence system that sits on a MFT (Multi Function Table).
- Ocena
- 5 / 5
- Polubienia
- 93
- Pobrania
- 418
- Wydruki
- 2
- Wyświetlenia
- 2328
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a flip stop for my DIY fence system I use on my diy MFT workbench.
Since I am using a 20mm dog hole pattern on the workbench the flip stops are only 40mm wide so they can be moved past the longer bench dogs that hold the fence in place.
I made it beefy so it doesn't flex when stock is pushed against it. Also the tolerances for the hinge are relatively tight (0.3mm). On my printer this makes a snug fit so the stop itself has no play. Your mileage may vary in that regard.
The M5 screw holes are not designed with printing tolerances which is why they will be undersized. This was done on purpose because I am using a reamer to widen them to 5mm after printing.
To produce one yourself you will need:
- 1x M5x40 hexagon head screw
- 1x M5x30 Buttonhead Allen screw
- 1x M5 Nyloc nut
- 1x Star knob for M5 hexagon head screw
- 1x Heavy duty t-slot nut for slot 8