PC Open Air Case Test Bench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple open air "case" that prints fast and without supports
- Ocena
- 4,5 / 5
- Polubienia
- 116
- Pobrania
- 1231
- Wydruki
- 6
- Wyświetlenia
- 7463
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I wanted to build a basic PC to use in my office so I designed this basic open air case.
This "case'' can be printed on a MK3 build plate with the motherboard tray facing down and it does not need supports. You have to disable the skirt in the default profile so the part can fit.
To mount the motherboard you need to use six case standoffs that you can screw directly into the printed motherboard tray. Depending on the printing tolerances you may need to drill out the holes so the standoffs can be screwed.
This was designed with a full ATX motherboard and PSU but other combinations may fit.