1 / 7
RAM Kühler Aufsatz / RAM Cooling Shroud /RAM Cooler — zdjęcie 1
1 / 7

RAM Kühler Aufsatz / RAM Cooling Shroud /RAM Cooler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Das ist mein einfach zu Druckender RAM Kühler Aufsatz für 80er Lüfter.

Ocena
0 / 5
Polubienia
41
Pobrania
339
Wydruki
1
Wyświetlenia
3804
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

Hier ist mein RAM Kühler Aufsatz mit dem man herausragende Kühlung selbst bei Max OC erreicht.

Jeder 80x80x25mm Lüfter sollte Problemlos eingesetzt werden können und Rastet auch ein.

Wenn ihr aber den Lüfter aus dem Fotos haben wollt dann schaut hier:

Thermalright TL-B8W

  • Drucker: BambuLab X1C
  • 0,4mm Düse
  • 0,2mm Layer Höhe
  • PETG , ABS
  • Stützstrucktur: Normal + Brim innen

Wenn ihr das Teil gedruckt habt dann würde ich mich über eine Bewertung und ein Make in den Kommentaren Freuen.

 

P.s. Die zwei Systembilder sind von dem User Katakuri1991 für den ich das Teil gedruckt hatte

 

English

Here is my RAM cooler attachment with which you can achieve outstanding cooling even at Max OC.

Each 80x80x25mm fan should be able to be used without any problems and also locks into place.

But if you want the fan from the photo then look here:

Thermalright TL-B8W

  • Printer: BambuLab X1C
  • Nozzle: 0.4mm
  • Resolution 0.2mm
  • Material: PETG, ABS
  • Support structure: Normal + Brim inside

If you have printed the part then I would be happy about a rating and a make in the comments.

 

The two system images are from the user Katakuri1991 for whom I printed the part

Tagi