Hinge Rest Door Stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drop in door stop
- Ocena
- 5 / 5
- Polubienia
- 107
- Pobrania
- 668
- Wydruki
- 4
- Wyświetlenia
- 2190
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Simple door stopper that you drop ontop of a hinger while the door is open, will never slip on slick tile/hardwood and will never get accidentally kicked out while you walk through.
This is designed to be squeezed between the door and the stop (or the jamb, I always forget which is which) on the doorframe.
Been using this at work on a fairly heavy door with a door closer that feels like it pushes fairly hard. I'd recommend you keep strength in mind while printing this: 4-5 shells, no less than 30% infill and something stronger than PLA. I'm using PETG and it is working well. I haven't tried it yet, but I feel like nylon would be ideal if you can manage it because it's strong and has a good amount of “give” to it so you know it won't completely snap on you.