Polar Filter Mount for Logitech Brio Webcam (FreeCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully parametric mount for attaching a polar filter to a webcam.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 110
- Wydruki
- 1
- Wyświetlenia
- 1051
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This model is completely parametric. When you open it in FreeCAD, you will see a spreadsheet called “parameters” in there. If you change values like the lens diameter there, just re-export the model and you have the model you need for your lens diameter.
The files I uploaded here are for a lens diameter of 52mm and a prong distance of 27mm, which perfectly fits the Logitech Brio web cam.
I printed this in PLA because I had some in the printer, but PETG should work just as well. With PETG, I'd probably reduce the lens diameter a bit (e.g. 51.8 instead of the actual 52) for a tighter fit of the lens.
Sadly, this model needs supports and they are a pain to remove… With organic supports, it's not as bad, so I suggest using those.
I love feedback, so please consider uploading a make if you like this model.