WS181 AOS EVO 3.5 GPS Mount (WIP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1.26g lightweight GPS mount for the Walksnail WS-M181GPS M10 series GPS
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Designed a small Lightweight GPS mount for the Walksnail WS-M181GPS 10th gen GPS module for FPV Drones. For reference the exact model I purchased from the Caddx website: https://caddxfpv.com/products/walksnail-ws-m181gps
This fits on the first two M2 top screws near the front of the top plate, 32mm separation. The mounting holes are 1.6mm thick and the M2X8 screws are sufficient. Part dimensions are 30mm, which widens to 32mm when placing the GPS Module inside the bracket through an interference fit.
Due to the design and fit this is still a work in progress to refine the design, however it is still ready to use
I printed in PRILINE TPU which is slightly more stiffer than Overture at 0.6mm nozzle size. 0.4 is expected to work fine and get rid of smaller gaps the 0.6mm nozzle creates.
Motivations for this was that other mounts for different GPS manufacturers exist but none specifically for the full Walksnail build.