1 / 3
Wall Hanger for Ironing Board with curved legs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall hanger (hook, holder) for an ironing board with curved legs.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 386
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (23)Powiązane
Wall hanger for an ironing board with curved legs. Use four 6mmx50mm half round head screws.
Print Settings
Material: PLA
Layer height: 0.2 mm
Perimeters: 4
Top layers: 4 layers
Bottom layers: 4 layers
Infill: 25%
Supports: no (if you have decent cooling)
Brim: yes (good practice with thin and tall objects)
Print Instructions
Print on the side so the layer lines are perpendicular to forces (gravity). Use brim to help bed adhesion.
