1 / 2
Hanging Bird House with Holes for Drainage/Air Flow — zdjęcie 1
1 / 2

Hanging Bird House with Holes for Drainage/Air Flow

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prints and scales easily.

Ocena
4 / 5
Polubienia
149
Pobrania
875
Wydruki
5
Wyświetlenia
2837
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Share Alike

A straightforward remix of @TripleGWorkshop's Droplet Hanging Bird House. I liked it the best of its kind: It's a nice shape that prints easily, has a good-sized front opening and built-in break-away support for the landing perch. What I added in the remix are holes for drainage and air flow. 

The model will scale easily. The default size has a entry hole of about 35mm diameter.  Print in PETG or ASA/ABS.

Included are 3mf files for three sizes. Small should print fine on a Mk3/Mk4,  Medium and Large are meant for printing on an XL. The model doesn't truly need supports but if you scale it up I suggest adding organic supports to the roof of the awning as the bridging gets worse and worse with size. 

Also, try Fuzzy surface — it looks so much nicer!

If you like what I'm doing…

 … consider buying me a coffee or joining my Club.

Tagi