1 / 2
920-0614-03 (iPod Nano 4G Prototype) case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective case for 920-0614-03 prototype board.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 563
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
If you happen to be one of the few people who:
- have a bunch of iPod Nano 4G prototype boards (920-0614-03), and
- have a 3D printer
then this is the model for you!
This is as simple protective case which exposes the two buttons and all edge I/O connectors. Now you can carelessly throw your weird prototype board around without worrying about damaging it.
BOM:
- 1x 920-0614-03-case-Top
- 1x 920-0614-03-case-Bottom
- 2x 920-0614-03-button
- 4x Ruthex M3S heatset insert
- 4x M3x16 SHCS
Possible improvements:
- LEDs lightpipe(s)
- wider opening for 3.5mm jack (some cables might not fit the current cutout)
- more space around the USB connectors (currently you might have to snip off some plastic to get the case to close)
- access to the top (ACF) and bottom connectors, whatever they are