Bambu P1S/P1P HSW Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple HSW mounting system for Bambu P1S/P1P
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 2339
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a way to mount my Pi camera in front of the printer with the glass closed for better quality videos/pictures/streaming. Also needed to be able to easily move the camera out of the way to remove prints so I adapted the HSW system to the opened top port on the Bambu P1S.
After the remix, realized the AMS riser I had used has a lip so had to adapt the remix to support the riser as well. So both models have been included.
Printed with PETG with 0.2 layer height and 15% infill. PLA should work but account for different shrinkage and tolerances and do not force anything to fit. Should be snug but not difficult to attach.