Clorox plunger base handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this because I didn't want to have to grab the bottom of the plunger base every time.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
I designed this because I didn't want to have to grab the bottom of the plunger base every time I had to move it to the other toilet. This was meant to be a full base with cutouts, but the single beam for the bottom has worked well enough. The single beam also allows it to be printed more easily, with a more reliable result.
This was printed for https://www.amazon.com/Clorox-Toilet-Plunger-White-Gray/dp/B00P7VW2H6
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.3mm
Infill:
80%
Filament: Sainsmart TPU Silver
Highly recommend using TPU just for its ability to handle moisture, but PLA can probably also work well.