1 / 3
ZYLtech Texas/Huge spool holder. 5KG Spool! (4x 608 bearings)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This spool holder will hold up to a 168mm wide spool. It uses 4 608 skateboard bearings with a low tolerance/loose fit
- Ocena
- 4,667 / 5
- Polubienia
- 65
- Pobrania
- 797
- Wydruki
- 14
- Wyświetlenia
- 3298
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 14) (Komentarze: 29)Remiksy (0)Kolekcje (71)Powiązane
This spool holder will hold up to a 168mm wide spool. It uses 4 608 skateboard bearings with a low tolerance/loose fit on the actual rollers but it fits tight with a small bit of force required to slot them in. if you have strength issues or if your rollers want to pop up ever, it has an m4 hole through each bearing but its not required.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
No
Supports:
No
200
Infill:
20
Filament:
zyltech PETG black
Category: 3D Printer Parts