Motor & TriangleLab filament runout sensor supports on D=8mm rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Supports and flanges for extrusion motor & for TriangleLab filament runout sensor on the same triangulation rod…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Supports and flanges for extrusion motor & for TriangleLab filament runout sensor on the same triangulation rod D=8mm (from Liar/David Dal, Stan 42, Bezain & Co...) for the Dagoma DiscoEasy and DiscoVery or other machine.
BOM:
- 8 x M3x8 screws
- 2 x M3x14 screws(provided with the filament runout sensor)
- 3 x M3x25 screws (motors mount)
- 10 x M3 nuts
End of filament runout sensor from TriangleLab (with wheels for very smooth movement, and the possibility of mounting several identical detectors in parallel - see the last 3 images on this subject for the electrical wiring):
https://www.aliexpress.com/item/Trianglelab-filament-runout-sensor-3D-Printer-Part-Material-detection-module-1-75mm-filament-detecting-module/32829808063.html
Standard Dagoma extruder or other extruder.
FYI, I have been using Dragon-Shark (v2) extuder which gave me satisfaction for over 2 years. It is available here (to print flat with supports): https://www.lesimprimantes3d.fr/forum/topic/3697-impression-flexible-sans-direct-drive/
Print Settings
Printer:
Disco Z122
Rafts:
No
Supports:
Yes
Resolution:
100 ou 200 um
Infill:
33% avec mur de 1.2 mm
Category: 3D Printer Parts