45 degree elbow for shaper origin vacuum hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sometimes when using the shaper origin in tight spaces, the vacuum hose can stick out and get in the way.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 354
- Wydruki
- 0
- Wyświetlenia
- 1329
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- BSD License
Sometimes when using the shaper origin in tight spaces, the vacuum hose can stick out and get in the way. This is a 45 degree elbow adapter that allows the hose to come out at a less obtrusive angle.
It's not recommended for continual use, since it doesn't have any way to lock into the vacuum port, but it should be fine for temporary use, when working close to an obstructing object.
NOTE: This was designed using the fscad programmatic design framework for Fusion 360 (see http://fscad.org). A link to the source file can be found at the bottom of the files section.