Didgeridoo Mouthpiece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Didgeridoo Mouthpiece for DIN 40/50 pipes
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 132
- Wydruki
- 2
- Wyświetlenia
- 1493
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Didgeridoo Mouthpiece for DIN 40/50 Drainage Pipes.
You take out the rubber from the drainage pipe and put it in the bottom slot. Then you slide in the pipe.
You can customize the sizes in the scad file. The design on the side is imported and can be scaled, its designed for DIN50 so you need to play with the height to make it look good on smaller Holes at the top. The different “design-import-*.stl” have differnt angeles for the bottom part of the design.
Prints without support if layer Height = 0.2mm.
For beginners to learn circular breathing i recommend using the 30mm Mouthpiece DIN40 pipe.
For more advanced players who want to play faster I recommend the 38mm Mouthpiece DIN50 pipe.