1 / 9
BaBo organizer insert files 5x2 or 6x2 (2 versions)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This BaBo insert was designed to hold 10 diamond files firmly in place and available at all times.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 187
- Wydruki
- 3
- Wyświetlenia
- 800
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (0)Kolekcje (49)Powiązane
This insert was designed for 10 diamond files as an addition to the amazing BaBo organizer system from @Willi. Check out his site for more great inserts and modules.
You can choose between two sizes:
- size 1: 150 x 60 mm (i.e. 5x2)
Please note:
The common diamond files are offered with a length of 140mm, although I have found that this seems to be only an approximate value. Therefore, before printing, please check that your files do not exceed the length of 140mm. The theoretical inner length of the box is 141.8 mm, so there is not much play here.
If only a few of the files are too long, you could consider cutting them by a few millimeters at the end of the shaft. Otherwise, please use size 2.
- size 2: 180 x 60 mm (i.e. 6x2)
The theoretical inner length of the box is 171.8 mm, so even larger diamond files should fit in nicely.
Printing:
Layer height: 0.2
Supports: No
Brim: No
Material: all
The uploaded examples are printed with PLA filament in black matt and grey