Coffee knock box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just wanted to test workflow with Fusion 360 and made some basic coffee knock box. *consider scaling to smaller size
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 447
- Wydruki
- 4
- Wyświetlenia
- 1765
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
My first thought was to find and print a coffee knockbox from the community library, but this was a perfect opportunity to test the Fusion 360 workflow, so I made this familiar design myself. Nothing special, nothing new. The rod is attached to the box by grooves.
The original model size is OK (see attached pictures of the first print compared to the DeLonghi Dedica 51mm portafilter), but it could actually be a bit smaller - so make sure you find the best scale for you!
Enjoy your coffee and hopefully see you on my next project! And next time it should be something phenomenal, right?
Make sure you use a moisture friendly filament such as PETG or similar to avoid any problems with durability and moulds.